Expansion valve

The expansion valve is actually an electrical constriction in the air ducts. The refrigerant of the air conditioner is pumped from the expansion vessel towards the radiator. The refrigerant is converted into gas. The expansion valve is the controller in this circuit. This valve reduces the pressure of the refrigerant. As the pressure is reduced, the temperature of the refrigerant will drop. The temperature is then measured and the expansion valve can determine how much refrigerant is to be regulated towards the evaporator. In this way, the air conditioning in the car can run as efficiently as possible.

Expansion valve defective

A defective expansion valve can have major consequences for the operation of the air conditioning and can even cause damage. It is therefore important to recognize a defect early on. To recognize such a defect, you can pay attention to a number of symptoms. The first symptom is a malfunctioning air conditioning system. A defect in the expansion valve can cause the air conditioner to malfunction and start blowing warm air. Another symptom of an expansion valve malfunction is ice build-up in the vents. If the expansion valve is not working properly, too much refrigerant may be pumped to the AC system. Excess refrigerant can cause frostbite in the fan openings. A final symptom is the constant running of the air conditioning compressor. If the expansion valve sticks or fails, this can cause the compressor to continuously pump refrigerant through the AC system

Expansion valve replacement

Replacing the expansion valve is a relatively easy job that you can do yourself. However, part of the dashboard will have to be removed, which will often take some time. When replacing the valve, you can observe the following steps:

1. Remove the glove box for easy access to the valve.

2. Next, the evaporator will also have to be disassembled. The valve is in most cases placed at the top behind the evaporator.

3. Now that you can easily access the valve, it can be removed.

4. Lubricate the new valve with oil and install it in the same way as the old valve was installed.

5. Install the evaporator and also replace the glove box.

Buy expansion valve AC

On our website you can easily search for the right expansion valve for your car based on your car model. You can easily enter these on the website, the correct parts will then be displayed. Are you looking for other air conditioning parts? At Winparts you will also find air conditioning condensers, air conditioning dryers, air conditioning evaporators, air conditioning fans, and pressure hoses.

Fit guarantee, show parts suitable for your vehicle.

Enter your number plate or select your vehicle.

Expansion valve

The expansion valve is part of the air conditioning (AC) of the car. This valve controls the flow and pressure of the refrigerant that is pumped towards the AC. Problems with the valve can cause not enough refrigerant to be pumped towards the air conditioner. If the air conditioning system does not get enough refrigerant, the car's interior cannot be cooled properly. Also, the air compressor may not be properly lubricated or may become overloaded, causing serious damage. At Winparts, you can easily find the right expansion valve for your car with your car model. Simply enter it on the website and the correct components will be displayed.

1 - 8 / 8 products

Filtered by: Brand: FEBI

Clear all filters

Filter

0 filters selected