Exhaust assembly paste and sealer

Exhaust assembly paste is a substance that provides a seal between the exhaust parts. Without this seal, gas leaks could occur in the exhaust. The exhaust consists of several parts such as the exhaust pipe pieces, the catalytic converter and exhaust backbox. These parts are connected to each other, which can sometimes cause small holes and cracks. These holes and cracks can then cause a gas leak as the exhaust gases are vented.

Exhaust assembly paste can be applied between the different exhaust parts. The paste will harden from the hot exhaust gases and then provide a good seal between the parts. Exhaust assembly paste is heat resistant and can often withstand temperatures of up to 700 degrees Celsius.

At Winparts you will also find all the necessary assembly and mounting parts for firmly fixing the exhaust parts. Think, for example, of clamps, rubbers, holders, assembly kits and springs.

Using exhaust assembly paste

Applying exhaust assembly paste is very easy. You can observe the following steps:

1. Remove dirt and rust from parts.

2. Then moisten the part that you are going to grease.

3. Apply the paste to the part using, for example, a brush, a knife or your fingers. Optionally, some moisture can be added to the paste to be able to apply thin layers.

4. When you have treated the parts to be mounted with the exhaust assembly paste, make sure to let the car idle for a few minutes. Allowing the car to idle will allow the exhaust assembly paste to harden and adhere well. The drying time of the exhaust assembly paste is therefore only a few minutes. Once you have completed the process, the exhaust is ready for use!

Remove exhaust assembly paste

Sometimes it will be necessary to remove exhaust assembly paste, for example because you want to replace a part of the exhaust. The paste is easily removed by tapping it gently with a hammer. In the case of pipe connections, you can try to rotate them back and forth. The exhaust assembly paste will crumble and is then easy to remove.

Buy exhaust assembly paste

You can buy exhaust assembly paste quickly and easily at Winparts. Easily navigate to the exhaust assembly paste of the desired brand. In our wide range you will also find all parts for assembling, overhauling and replacing the exhaust. Think of downpipes, particle filters, manifolds and exhaust valves.

Exhaust assembly paste and sealer

Exhaust assembly paste is an indispensable tool when assembling the exhaust. The exhaust consists of many different parts such as; the catalytic converter, exhaust backbox and exhaust pipe. It is important to prevent a gas leak from occurring in the small holes and cracks in the places where exhaust parts are connected to each other. While driving, the exhaust will transport harmful gases. Exhaust assembly paste can be applied between the different exhaust parts to ensure a good seal. This paste is heat resistant and ensures that no more gas can escape. At Winparts you will find exhaust assembly paste from quality brands such as Liqui Moly, Holts and Bosal.

1 - 3 / 3 products

Filtered by: Brand: Liqui Moly

Clear all filters

Filter

0 filters selected