Brake light switch

The brake light switch causes the brake lights to come on during braking. This switch is located under the brake pedal and is activated as soon as the brake pedal is pressed. The switch is connected to the brake pedal by means of a rod. Over time, a brake light switch can oxidize because it is an electrical component. Oxidation means that rust or corrosion develops on the part. Due to this oxidation, no (good) electrical connection can be made between the brake pedal and the brake lights. The brake lights will no longer illuminate. For your safety, it is important that other road users behind you know when you are slowing down. If it is not clear that you are slowing down, this can cause unsafe situations. Therefore, make sure that you recognize and replace a broken brake light switch in time.

Brake light switch broken

When the brake light switch is broken, you can recognize it by a number of symptoms. The first and most common symptom is the brake lights not turning on when braking. When the brake light switch is broken, it can no longer activate the brake lights. When you check the brake lights and they all don't come on, it's unlikely that the lights broke at the same time. In the case of two failing brake lights, a brake light switch failure is likely. Another symptom is the brake lights staying on. A faulty switch can cause a short circuit in the system, causing the brake lights to remain on even without braking. When the brake lights stay on, the battery can also be discharged faster and the brake lights will fail faster.

Replace brake light switch

Replacing a faulty brake light switch is important for your safety. Replacing it yourself is inexpensive and you can do it yourself. Follow these steps to replace the switch:

1. Disconnect the car battery. To turn off the electrical circuit in the car, you will have to remove the negative lead from the battery;

2. Locate the brake light switch. The switch is often located above the brake pedal, under the dashboard. If you can't find the switch, you can consult the car's manual;

3. Remove the wiring from the switch. The wiring is usually attached with a clip;

4. Loosen the switch nuts to remove it;

5. Install the new switch. Note that you may need to depress the brake pedal to properly position the switch;

6. Reconnect the wiring and the car battery;

7. Check whether the brake lights function properly again.

Buy brake light switch

Buying a brake light switch for your car is easy and fast at Winparts. To find the right switch for your vehicle, enter the number plate or select the car model on the website. The suitable car parts will then be displayed. Are you looking for other switches? In our wide range you will also find reverse light switches, oil pressure switches, temperature switches, clutch switches and transmission switches.

Fit guarantee, show parts suitable for your vehicle.

Enter your number plate or select your vehicle.

Brake light switch

The brake light switch of the car is the link between the brake pedal and the brake light. When the brake pedal is pressed by the driver, the brake light switch will cause the brake lights to come on. The brake lights of the car are very important. The brake lights warn the traffic behind you that you are braking. For this reason, proper operation of the brake light switch is of great importance for the safety of you and your fellow road users. Do the brake lights stay on or do they no longer light up during braking? Then check whether the switch is still in good condition. At Winparts you will find brake light switches from brands such as Blue Print, Febi and EPS Facet. Simply enter your number plate on the website or select the car model, the correct parts will then be displayed.

1 - 20 / 32 products

Filtered by: Brand: Meat & Doria

Clear all filters

Filter

0 filters selected