5in1 Radiator stop leak 310ml

5in1 Radiator stop leak 310ml

5in1 Radiator stop leak is a coolant additive for petrol and diesel engines that permanently seals radiator leaks. Simple hairline cracks in the radiator are often overlooked during maintenance. These hairline cracks can cause a leak in the long term. A leak is detected by the 5in1 radiator stop leak and filled with sealing components.

Properties

1. Stops and prevents leaks
2. Protects the cooling system
3. Added corrosion inhibitors
4. Helps prevent constipation
5. Suitable for all types of coolant and antifreeze.
6. Reliably seals and prevents hairline cracks and leakage in radiators, water pump, cylinder head and engine block.
7. Eliminates the need for expensive repairs
8. Protects the entire cooling system against rust and corrosion
9. Lubricate the water pump
10. Contains no acids and is non-toxic
11. Does not attack rubber hoses, metal parts and gaskets

Instructions for use
Suitable for all aluminium, plastic and steel radiators of cooling systems in petrol, diesel and LPG engines. Compatible with water, coolants and conventional antifreeze. Not suitable for cooling circuits with a built-in filter unit. Shake very well before use. Add the contents of the can to the slightly warm (but NOT hot!) cooling system with the engine switched off.

It is recommended to add the contents directly to the radiator. If the radiator is a closed system, the contents can also be added to the coolant expansion tank. After adding, close the cooling system tightly, start the engine and let it run for 10 minutes or drive a short distance with the heating system turned on.

Important: Be careful when opening the radiator or cooling system: hot coolant or steam may escape from the system! Dirty cooling systems should first be cleaned with TecLub Radiator Cleaner.

One 310 ml bottle is sufficient for cooling systems with a capacity of up to 12 litres.