Wide range body panels for your car. Order here

Broken body panel

Is the body panel of the car damaged because of a dent or scratch? Then you can easily replace it. Replacing the body panel is in most cases easier than removing the dent or repairing the scratches and rust. Replacing the body panel is a relatively inexpensive option and you can certainly do it yourself. To do this, follow the steps as mentioned below.

Replace body panel

You can replace a body panel yourself and it will take about three to four hours of your time. Follow these steps to replace this part:

1. Remove the grille and bumper from the car. Make sure to keep it in a safe place to avoid scratching these parts.

2. Place a jack under the car and remove the wheel on the affected side of the car.

3. Then also dismantle the wheel arch or the inner mudguard

4. Check if the headlight needs to be removed. On some cars, it is not possible to reach the fender screws until the headlight has been removed.

5. Remove the fender screws and keep them safe for the new part. After removing the old body panel, the new one can be placed.

6. The dismantled parts can then be replaced.

Buy body panel

The body panels are supplied with a primer, so you need to have this sprayed in the correct color yourself. You can easily find the right mudguard for your vehicle with your license plate or car model. You can easily enter this on our website. The suitable car parts will then be displayed. Are you looking for other car body parts? At Winparts you will also find mirrors, grilles, mud flabs and bumper support.

Body panel

The body panels of the car are part of the body and are located at the front and rear of the car, above the wheel arches. The body panels protect the car against moisture and dirt from the outside. The body is constantly exposed to stone chips, moisture and dirt. That is why this part of the car is very sensitive to dents, scratches and rust. Fortunately, the car's body panels are easy to replace! At Winparts you will find body panels for both the front and rear of the car. Enter your license plate number or select the car model and the correct car parts will then be displayed.

4581 - 4600 / 4878 products

Filter

0 filters selected

Block view
List view

Splashback

Fitting Position: Front right (driver's side)
Mechanically processed: With hole for indicator
Mechanically processed: With holes for decor / protective strip
Warranty: 2 years
Production date from: 04.1996
Production date to: 10.2002