Carpoint Professional Jumper Cable 35mm² Insulated Handle

These professional Carpoint jumper cables are the solution if your car won't start due to a dead battery. They are suitable for 12 and 24 volt batteries. They're suitable for petrol cars with an engine displacement up to 7000cc and diesel cars up to 4000cc. They have a 35mm² cable gauge and an extra-thick copper core. The jumper cable is 3.5 meters long and features fully insulated clamps. They are TÜV/GS certified. They also feature surge protection to protect the vehicle's circuits from damage caused by overvoltage and voltage spikes during jump starting.

Connecting jumper cables:

• Clamp the red jumper cable to the + terminal of the dead battery
• Connect the other red clamp to the + terminal of the good battery
• Connect the black jumper cable to the - terminal of the full battery
• Connect the other remaining black clamp to a grounded area of the vehicle with the dead battery, a metal part of the engine or unpainted bodywork

Then start the engine of the vehicle providing assistance, and then start the engine of the vehicle with the dead battery. Disconnecting the jumper cables should be done in the reverse order.

After use, store the Carpoint jumper cables in the supplied carrying bag and keep them in the car so you always have them at hand.