Brake pad wear indicator

The brake pad wear indicator is a device that is mounted on the brake pads with a wire. When the brake pads are very worn, the indicator will come into contact with the brake disc. As soon as the wear indicator touches the brake disc, this is transmitted to the car's on-board computer. The on-board computer will illuminate a warning light in the dashboard. By the time the warning light comes on, the brake pads are too worn. In this case, be sure to replace the brake pads as soon as possible. Driving with worn brake pads can be very dangerous. The braking force can be greatly reduced.

Not every car has a wear indicator. Unfortunately, you can't just build this in either. Cars that are equipped with a wear sensor have a separate or fixed indicator. The fixed wear indicators are attached to the brake pads and are replaced together with the brake pads. Most brake pads, however, have a separate indicator, which is clamped onto the brake pads. In this case, it is useful to check the condition of the indicator when you replace the brake pads. In most cases it is recommended to replace the wear indicator together with the brake pads.

Wear indicator broken

The wear indicator that is attached to the brake pads will have to be replaced together with the brake discs. If you have a loose wear indicator, it is important to check it regularly. In general, the indicator will soon break when you change the brake pads. The lifespan of a separate wear sensor is therefore approximately the same as the lifespan of a brake pad. We therefore recommend that you replace the wear indicator when you replace the brake pads. This way you can be sure that the indicator can do its job well and you will not be faced with surprises.

Replace wear indicator

Replacing a loose wear indicator is not a difficult job and you can do it yourself, provided you have the right tools at home. For example, you need a car jack and axle stands to jack up and support the car. Briefly, the mounting of a new indicator works in the following way:

1. Raise the car with a car jack and make sure it remains stable by supporting it with axle stands.

2. Loosen the wheel bolts and remove the wheel from the car.

3. The wear indicator is in most cases attached to the brake pad with a clip. So you can easily pick it up.

4. Follow the wire from the wear indicator to the coupling point. You can easily disconnect the device.

5. Connect the new wear indicator to the coupling point.

6. The indicator can then be clamped back onto the brake pad with the clip.

7. Put the wheels back in place and lower the car again.

Buy wear indicator

Buying a wear indicator is quick and easy at Winparts. Simply enter your number plate or car model on the website and the correct parts will be displayed. Are you looking for other accessories for the braking system? In our wide range you will also find brake hoses, brake cleaner, ABS sensors and assembly parts.

Fit guarantee, show parts suitable for your vehicle.

Enter your number plate or select your vehicle.

Brake pad wear indicator

The brake pad wear indicator is a sensor which is mounted on one or more brake pads. This indicator shows when your car's brake pads need to be replaced. When you brake as a driver, the brake pads will be pressed against the brake discs. This creates a powerful friction between the parts, which can cause the car to slow down. This friction will wear the brake pads over time. Many modern cars today are equipped with a wear indicator. This means you no longer have to manually measure whether the brake pads are worn. Do you need a new wear indicator? Simply enter the number plate or car model on the website and the correct parts will be displayed.

21 - 40 / 2645 products

Filter

0 filters selected

Block view
List view

Free 30 days exchanges

Fast shipping: 2 days

Expert support

< 1 2 3 4 ... 133 >

Services to UK temporarily suspended

From 1 Januari 2021 the BREXIT is a fact. We temporarily suspend our service to the United Kingdom because of expected difficulties with shipments. International customers other than UK residents, can still use our service. We are happy to supply all the car parts you need.

Please click one of the buttons below:

winparts.eu winparts.ie

Brake pad wear indicator

Warning contact, brake lining/pad wear AP160 Bosch

£ 1.61

Warning Contact, brake pad wear 11936 FEBI

£ 9.19

Warning Contact, brake pad wear 29414 FEBI

£ 3.36

Warning Contact, brake pad wear GIC242 TRW

£ 3.38

Warning Contact, brake pad wear 01498 FEBI

£ 0.69

Warning Contact, brake pad wear 102262 FEBI

£ 9.17

Warning Contact, brake pad wear AP317 Bosch

£ 10.38

Warning Contact, brake pad wear 11935 FEBI

£ 7.22

Warning Contact, brake pad wear 24.8190-0067.2 ATE

£ 3.91

Warning Contact, brake pad wear 37669 FEBI

£ 8.03

Warning Contact, brake pad wear AP1131 Bosch

£ 10.75

Warning Contact, brake pad wear 17489 FEBI

£ 5.44

Warning Contact, brake pad wear

£ 7.41

Warning Contact, brake pad wear AP803 Bosch

£ 10.31

Warning Contact, brake pad wear AP308 Bosch

£ 3.51

Warning Contact, brake pad wear AP1117 Bosch

£ 9.35

Warning Contact, brake pad wear 39724 ABS

£ 2.85

Warning Contact, brake pad wear AP345 Bosch

£ 11.85

Warning Contact, brake pad wear

£ 4.41

Warning Contact, brake pad wear 39138 FEBI

£ 9.51

Services to UK temporarily suspended

£ 1.⁶¹

£ 9.¹⁹

£ 3.³⁶

£ 3.³⁸

£ 0.⁶⁹

£ 9.¹⁷

£ 10.³⁸

£ 7.²²

£ 3.⁹¹

£ 8.⁰³

£ 10.⁷⁵

£ 5.⁴⁴

£ 7.⁴¹

£ 10.³¹

£ 3.⁵¹

£ 9.³⁵

£ 2.⁸⁵

£ 11.⁸⁵

£ 4.⁴¹

£ 9.⁵¹