Sonax Profiline Ceramic Coating Plastic + Rubber
Sonax Profiline Ceramic Coating Plastic + Rubber is a new set based on Si-Carbon technology for refreshing and protecting unpainted exterior plastic parts such as trim, bumpers, and mirror caps. This extremely flexible coating is also suitable for tire maintenance and protects against UV discoloration. It provides surfaces with strong water- and dirt-repellent properties and is very easy to use. Set of 4 application pads.
Apply a few drops of Ceramic Coating Plastic + Rubber to the soft foam side of an application pad and apply it thinly to the surface in small sections. Be careful not to get the product on the vehicle's paint. If this does happen, wipe it off immediately with the microfiber cloth you used for preparation.
After a short exposure time of approximately 3-5 minutes, remove any excess product with a new, soft microfiber cloth. The coating must then cure for at least 6 hours. During this entire period, the vehicle must be kept in a dry environment, and the treated surfaces must not be touched. For optimal product effectiveness, we recommend allowing the coating to cure for 12 hours to ensure complete reaction with the surface.
Notes: Always use pH-neutral shampoos such as Sonax Shine Shampoo or Sonax Profiline ActiFoam. Avoid alkaline cleansers.
Hazard statements (CLP):
- H226 Flammable liquid and vapour.
- P102 Keep out of reach of children.
| application | Rubber, plastic |
| Packing Type | Tin |
| Warranty | 2 years |
| Contents [ml] | 50 |
| Weight [kg] | 0,140 |