Autoglym Ultra High Definition Wax 120gr

Autoglym Ultra High Definition Wax

Ultra High Definition Wax contains a carefully balanced, yet complex blend of polymers, Carnauba and microcrystalline waxes. Treated surfaces are particularly high-gloss in combination with exceptional resistance to environmental pollution, including salt, cleaning agents, UV light, acid rain and industrial precipitation. The product contains absolutely no abrasives, water and emulsifiers. The complete set consists of:

1. 120gr Ultra High Definition Wax
2. High Definition Applicator
3. A Hi-Tech Finishing Cloth.

This easy-to-use wax should be applied as thinly and evenly as possible.
You have used too much wax if it leaves streaks when you polish it. If you use the Ultra High Definition Wax then it makes no sense to use the Extra Gloss Protection.

Instructions:

1. Check your clean and dry paint for dirt or light scratches and if necessary treat with Autoglym Clay Kit for Surface Repair (Surface Detailing Clay Kit) or Super Resin Polish (Super Resin Polish).
2. Moisten the white side of the included wax sponge. Gently dab the sponge into the wax in the jar, then apply the wax to the clean, dry paint in small circular motions to leave a thin, even coat on all painted surfaces. Don't apply too much as it will make it more difficult to rub the wax on later. Do not apply the product to unpainted rubber or unpainted plastic trim.
3. Let the wax layer dry on the surface for 10-15 minutes. Rub with the supplied Hi-Tech Finishing Cloth, turning the cloth regularly.
4. Wash regularly with Ultra High Definition Shampoo to maintain the finish. This will remove the dirt, but not the Ultra High Definition Wax.
5. After use, wash the sponge with a mild detergent, rinse and allow to air dry. Not suitable for matt paint.

Hazard statements (CLP):
- H228 Flammable solid
- H336 May cause drowsiness or dizziness