Back to category
KW Suspensions

KW Variant 1 Coilover Kit

KW Variant 1 Coilover Kit KW Variant 1 Coilover Kit, Image 2 KW Variant 1 Coilover Kit, Image 3 KW Variant 1 Coilover Kit, Image 4 KW Variant 1 Coilover Kit, Image 5 KW Variant 1 Coilover Kit, Image 6 KW Variant 1 Coilover Kit, Image 7 KW Variant 1 Coilover Kit, Image 8 KW Variant 1 Coilover Kit, Image 9 KW Variant 1 Coilover Kit, Image 10 KW Variant 1 Coilover Kit, Image 11 KW Variant 1 Coilover Kit, Image 12
  • KW Variant 1 Coilover Kit
  • KW Variant 1 Coilover Kit, Thumbnail 2
  • KW Variant 1 Coilover Kit, Thumbnail 3
  • KW Variant 1 Coilover Kit, Thumbnail 4
  • KW Variant 1 Coilover Kit, Thumbnail 5
  • KW Variant 1 Coilover Kit, Thumbnail 6
  • KW Variant 1 Coilover Kit, Thumbnail 7
  • KW Variant 1 Coilover Kit, Thumbnail 8
  • KW Variant 1 Coilover Kit, Thumbnail 9
  • KW Variant 1 Coilover Kit, Thumbnail 10
  • KW Variant 1 Coilover Kit, Thumbnail 11
  • KW Variant 1 Coilover Kit, Thumbnail 12

Product number: 1032001

Manufacturer number: 10240019

EAN: 4250173360814

£ 942.07

Incl. VAT
View product specifications
In stock
Delivery 24-06-2026

Free Shipping

Secure payment
  • checkmark Free 30 days exchanges
  • checkmark Any part, any car
  • checkmark Fast shipping: 2 days
  • checkmark Expert support

Ecommerce Europe Trustmark UPS

Customer service: +31 85 070 52 25

Ask your question at our product specialists.

Questions and answers.
Ask your question at our product specialists.

Fit guarantee, show parts suitable for your vehicle.

or .

Model

X

Type

X

Searching parts for your car

  • Specifications

    KW Suspension Variant 1 Screw set

    Sporty to use and a fantastic look. With factory pre-configured damping. No difficult adjustment procedure, but immediately the best tuning for your car.

    KW propeller sets are high-quality propeller sets that drive more comfortably than cheaper alternatives, while the car is considerably sportier to drive. Tilting and diving are greatly reduced. This is because the dampers are precisely tuned and tested for your car. The steering feel increases as a result and you can better focus the car on the circuit under load.

    The V1 screw set has been extensively tested and is height adjustable. The screw sets are characterized in the following points:

    1. KW is used in various racing classes
    2. German quality
    3. Stainless steel "Inox technology"
    4. Adjustable reduction
    5. Approved for public roads, also in Germany
    6. Including extensive assembly and adjustment instructions

    The ideal screw set for street use

    With the KW Variant 1 screw set you achieve a maximum reduction in the TÜV-tested adjustment range. Depending on the vehicle variant, the range varies from 30 to 70 mm or 50 to 90 mm.

    Stainless steel

    Even after years of use you can easily adjust the height by the patented, dirt-resistant trapezoidal thread with anti-rust treatment (INOX)

    Tool kit

    This set is supplied including the "KW Tool kit" with assembly and adjustment instructions.

    Note: Only suitable for vehicles with front axle mounting M10 bolts


    Front axle + rear axle height adjustable (front axle
    coil springs, rear axle springs with height adjustment +
    dampers).
    MaterialStainless Steel
    SuspensionThreaded Suspension (height adjustable)
    Shock Absorber SystemNot adjustable/adjustable
    Warranty2 years
    reduction for35-65 mm
    lowering rear25-50 mm
    Justerbar dämpningNo
    Note (see PDF)2)

  • Applicability

    FIAT
    BRAVO II
    BRAVO II (198_) | 11.2006-12.2014 1.4 (198AXA1B) - 1368ccm, 90pk, 66kw - 192 B2.000
    BRAVO II (198_) | 11.2006-12.2014 1.4 16V (198AXS1B) - 1368ccm, 140pk, 103kw - 198 A7.000
    BRAVO II (198_) | 11.2006-12.2014 1.4 T-Jet (198AXF1B) - 1368ccm, 150pk, 110kw - 198 A1.000
    BRAVO II (198_) | 11.2006-12.2014 1.4 T-Jet (198AXG1B) - 1368ccm, 120pk, 88kw - 198 A4.000
    BRAVO II (198_) | 11.2006-12.2014 1.6 D Multijet (198AXH1B) - 1598ccm, 105pk, 77kw - 198 A3.000, 844 A3.000
    BRAVO II (198_) | 11.2006-12.2014 1.6 D Multijet (198AXM1B) - 1598ccm, 90pk, 66kw - 198 A6.000
    BRAVO II (198_) | 11.2006-12.2014 1.9 D Multijet (198AXB1A) - 1910ccm, 120pk, 88kw - 192 A8.000
    BRAVO II (198_) | 11.2006-12.2014 1.9 D Multijet (198AXD1A) - 1910ccm, 116pk, 85kw - 192 A1.000, 192 B4.000
    BRAVO II (198_) | 11.2006-12.2014 1.9 D Multijet (198AXE1A) - 1910ccm, 90pk, 66kw - 192 B5.000
    BRAVO II (198_) | 11.2006-12.2014 2.0 D Multijet (198AXPIB) - 1956ccm, 163pk, 120kw - 844 A2.000, 198 A8.000

  • Manufacturer

    KW Suspensions
    The German KW suspensions are known for the good quality products.
    The suspension sets have been developed for specific car models , and perfectly balanced for optimum driving behavior.

    The KW suspension propeller sets are not only internally superior to most other brands, but also the appearance
    is highly corrosion-resistant and durable designed by the use of stainless steel.
    The screw sets are delivered including installation and adjustment instructions (toolkit).

    Winparts offers the following lines of KW Suspensions:

    1. Street comfort : 10-40 mm reduction, damping adjustable
    2. Inox-Line V1 : 30-90 mm reduction, solid damping

  • Delivery time

    Expected delivery date:

    24-06-2026

Secure payment

You recently viewed