Brake Caliper CR1558 Bosch
No specifications available yet
Back to category
View product specifications
Secure payment
KW Variant 1 Coilover Kit
Product number: 1032514
Manufacturer number: 10281018
EAN: 4250173398978
£ 1,441.46
Incl. VAT
In stock
Delivery 24-06-2026
Free Shipping
Secure payment
-
Free 30 days exchanges
-
Any part, any car
-
Fast shipping: 2 days
-
Expert support
Customer service: +31 85 070 52 25
Ask your question at our product specialists.
Questions and answers.
Fit guarantee, show parts suitable for your vehicle.
or .
-
Specifications
KW Suspension Variant 1 Screw set
Sporty to use and a fantastic look. With factory pre-configured damping. No difficult adjustment procedure, but immediately the best tuning for your car.
KW propeller sets are high-quality propeller sets that drive more comfortably than cheaper alternatives, while the car is considerably sportier to drive. Tilting and diving are greatly reduced. This is because the dampers are precisely tuned and tested for your car. The steering feel increases as a result and you can better focus the car on the circuit under load.
The V1 screw set has been extensively tested and is height adjustable. The screw sets are characterized in the following points:
- KW is used in various racing classes
- German quality
- Stainless steel "Inox technology"
- Adjustable reduction
- Approved for public roads, also in Germany
- Including extensive assembly and adjustment instructions
The ideal screw set for street use
With the KW Variant 1 screw set you achieve a maximum reduction in the TÜV-tested adjustment range. Depending on the vehicle variant, the range varies from 30 to 70 mm or 50 to 90 mm.
Stainless steel
Even after years of use you can easily adjust the height by the patented, dirt-resistant trapezoidal thread with anti-rust treatment (INOX)
Tool kitThis set is supplied including the "KW Tool kit" with assembly and adjustment instructions.
Note: Only suitable for vehicles with DDC and a strut diameter of 55mm
Front axle + rear axle height adjustable (front axle
coil springs, rear axle springs with height adjustment +
dampers).
Only for vehicles with a clamping diameter on the front axle of
55 mm.
The electronic damper control must be switched off.
An electronic switch-off set is included with the
delivery included.
Not for vehicles with self-leveling control / air suspension.
Material Stainless Steel Suspension Threaded Suspension (height adjustable) For vehicles with electronic suspension control Shock Absorber System Not adjustable/adjustable Warranty 2 years reduction for 25-50 mm lowering rear 35-60 mm Justerbar dämpning No Housing diameter in clamping area [mm] 55 Note (see PDF) 2),8),57),67),88) -
Applicability
VOLKSWAGEN SHARAN SHARAN (7N1, 7N2) | 05.2010-11.2022 1.4 TSI - 1390ccm, 150pk, 110kw - CAVA, CTHA SHARAN (7N1, 7N2) | 05.2010-11.2022 1.4 TSI - 1395ccm, 150pk, 110kw - CZDA, DJKA SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI - 1968ccm, 136pk, 100kw - CFFA SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI - 1968ccm, 140pk, 103kw - CFFB SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI - 1968ccm, 115pk, 85kw - CFFE, CUVA, DFLD, DLTC SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI - 1968ccm, 170pk, 125kw - CFGB SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI - 1968ccm, 177pk, 130kw - CFGC, DLUB SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI - 1968ccm, 150pk, 110kw - CUVC, DFLA, DLTA SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI - 1968ccm, 184pk, 135kw - CUWA, DFMA SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI 4motion - 1968ccm, 140pk, 103kw - CFFB SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI 4motion - 1968ccm, 150pk, 110kw - CUVC, DFLA, DLTA SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI 4motion - 1968ccm, 184pk, 135kw - DFMA SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TDI 4motion - 1968ccm, 177pk, 130kw - DLUB SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TFSI - 1984ccm, 200pk, 147kw - CCZA SHARAN (7N1, 7N2) | 05.2010-11.2022 2.0 TSI - 1984ccm, 220pk, 162kw - DEDA -
Manufacturer
The German KW suspensions are known for the good quality products.
The suspension sets have been developed for specific car models , and perfectly balanced for optimum driving behavior.
The KW suspension propeller sets are not only internally superior to most other brands, but also the appearance
is highly corrosion-resistant and durable designed by the use of stainless steel.
The screw sets are delivered including installation and adjustment instructions (toolkit).
Winparts offers the following lines of KW Suspensions:
1. Street comfort : 10-40 mm reduction, damping adjustable
2. Inox-Line V1 : 30-90 mm reduction, solid damping
-
Delivery time
Expected delivery date:
24-06-2026
Secure payment
You recently viewed
-
In stock