Sporty use with a fantastic look! This screw set from the German company KW offers very high quality combined with a beautiful design. The V2 screw set has been extensively tested and both the height and outgoing damping are individually adjustable. The rolling movements of the bodywork are greatly limited, so that your car steers more directly and sportier.
KW is used in various racing classes
German quality
Stainless steel "Inox technology"
Adjustable reduction
Outgoing damping adjustable (16 clicks)
Approved for public roads, also in Germany
Including extensive assembly and adjustment instructions
The ideal screw set for a combination of street and circuit use! With the KW Variant 2 screw set you achieve a maximum reduction in the TÜV-tested adjustment range. Depending on the vehicle variant, the range varies from 30 to 70 mm or 50 to 90 mm. Even after years of use you can easily adjust the height by the patented, dirt-resistant trapezoidal thread with anti-rust treatment (INOX)
Tool kit This set is supplied including the "KW Tool kit" with assembly and adjustment instructions.
Only for vehicles with a clamping diameter on the front axle of 50 mm. Dampers are equipped with easy-to-operate adjustment wheels. Due to the design, only in the tensile force phase with accessible piston rod. Variant 2 and variant 3 for vehicles with xenon headlights only possible if the height sensor on the rear axle is in the series is not attached to the dust protection tube.
Material
Stainless Steel
Suspension
Threaded Suspension (height adjustable)
Shock Absorber System
Adjustable damping force
Damping force adjustable in tension steps
Warranty
2 years
reduction for
50-90 mm
lowering rear
60-80 mm
axle load
-1075 kg
rear axle load
-1300 kg
Justerbar dämpning
Yes
Housing diameter in clamping area [mm]
50
Note (see PDF)
45),48),58),79)
Applicability
VOLKSWAGEN
CADDY III
CADDY III Box Body/MPV (2KA, 2KH, 2CA, 2CH) | 03.2004-05.2015 1.2 TSI - 1197ccm, 86pk, 63kw - CBZA
CADDY III Box Body/MPV (2KA, 2KH, 2CA, 2CH) | 03.2004-05.2015 1.2 TSI - 1197ccm, 105pk, 77kw - CBZB
The German KW suspensions are known for the good quality products. The suspension sets have been developed for specific car models , and perfectly balanced for optimum driving behavior.
The KW suspension propeller sets are not only internally superior to most other brands, but also the appearance is highly corrosion-resistant and durable designed by the use of stainless steel. The screw sets are delivered including installation and adjustment instructions (toolkit).
Winparts offers the following lines of KW Suspensions:
1. Street comfort : 10-40 mm reduction, damping adjustable 2. Inox-Line V1 : 30-90 mm reduction, solid damping