Expansion Tank, power steering hydraulic oil
No specifications available yet
Back to category
Drive shaft GKND12982 Spidan
Product number: 2111603
Manufacturer number: GKND12982
EAN: 4019064313588
-
Free 30 days exchanges
-
Any part, any car
-
Fast shipping: 2 days
-
Expert support
Customer service: +31 85 070 52 25
Ask your question at our product specialists.
Questions and answers.
Fit guarantee, show parts suitable for your vehicle.
or .
-
Specifications
Pay attention to the technical original specifications of the
CV joint! Here a rotation angle greater than 50 ° is required!
Supplementary Article/Info 2 With screw Bolt Hole Circle Ø [mm] 94 Number of Bores 6 Outer gearing wheel side 36 Thread Size M16x1.5 Service exchange part Wheel-side joint diameter [mm] 98 Transmission-side joint diameter [mm] 108 Warranty 2 years Length [mm] 807 O-ring diameter (mm) 60 Hole diameter [mm] 11 Similar products of other manufacturers
-
Applicability
AUDI Q3 Q3 (F3B) | 07.2018-06.2021 35 TDI - 1968ccm, 150pk, 110kw - DFGA, DTSA, DTSB, DXPA Q3 Sportback Q3 Sportback (F3N) | 06.2019-06.2021 35 TDI - 1968ccm, 150pk, 110kw - DFGA, DTSA, DTSB, DXPA TT TT (FV3, FVP) | 07.2014-08.2018 2.0 TDI - 1968ccm, 184pk, 135kw - CUNA TT (FV3, FVP) | 07.2014-08.2018 2.0 TFSI - 1984ccm, 230pk, 169kw - CHHC TT (FV3, FVP) | 07.2014-08.2018 45 TFSI - 1984ccm, 245pk, 180kw - DKTB, DNPA TT Roadster TT Roadster (FV9, FVR) | 11.2014-08.2018 2.0 TDI - 1968ccm, 184pk, 135kw - CUNA TT Roadster (FV9, FVR) | 11.2014-08.2018 2.0 TFSI - 1984ccm, 230pk, 169kw - CHHC TT Roadster (FV9, FVR) | 11.2014-08.2018 45 TFSI - 1984ccm, 245pk, 180kw - DKTB, DNPA CUPRA FORMENTOR FORMENTOR (KM7, KMP) | 07.2020-??? 2.0 TDI - 1968ccm, 150pk, 110kw - DTTC, DTTA SEAT ATECA ATECA (KH7, KHP) | 04.2016-??? 2.0 TDI - 1968ccm, 150pk, 110kw - DFFA, DTTC, DTTA, DXRB ATECA (KH7, KHP) | 04.2016-??? 2.0 TDI - 1968ccm, 116pk, 85kw - DTRD TARRACO TARRACO (KN2) | 09.2018-05.2024 2.0 TDI - 1968ccm, 150pk, 110kw - DFGA, DTSA, DTSB SKODA KAROQ KAROQ (NU7, ND7) | 07.2017-??? 2.0 TDI - 1968ccm, 150pk, 110kw - DFFA, DTTA, DXRB KAROQ (NU7, ND7) | 07.2017-??? 2.0 TDI - 1968ccm, 116pk, 85kw - DTRD, DTRB KODIAQ I KODIAQ I (NS6, NS7, NV7) | 10.2016-??? 2.0 TDI - 1968ccm, 116pk, 85kw - DFGC SUPERB III SUPERB III (3V3) | 03.2015-06.2024 1.8 TSI - 1798ccm, 180pk, 132kw - CJSA, CJSC SUPERB III (3V3) | 03.2015-06.2024 2.0 TDI - 1968ccm, 150pk, 110kw - CRLB, DFGA, DFEA, DSRA, DSRB, DTSA, DTSB SUPERB III (3V3) | 03.2015-06.2024 2.0 TDI - 1968ccm, 190pk, 140kw - DDAA, DFCA, DFHA SUPERB III Estate (3V5) | 03.2015-06.2024 1.8 TSI - 1798ccm, 180pk, 132kw - CJSA, CJSC SUPERB III Estate (3V5) | 03.2015-06.2024 2.0 TDI - 1968ccm, 150pk, 110kw - CRLB, DFGA, DFEA, DSRA, DSRB, DTSA, DTSB SUPERB III Estate (3V5) | 03.2015-06.2024 2.0 TDI - 1968ccm, 190pk, 140kw - DDAA, DFCA, DFHA VOLKSWAGEN ARTEON ARTEON (3H7, 3H8) | 03.2017-12.2024 2.0 TDI - 1968ccm, 150pk, 110kw - DBGA, DFGA, DSRA, DSRB, DTSA, DTSB, DXPA ARTEON (3H7, 3H8) | 03.2017-12.2024 2.0 TDI - 1968ccm, 190pk, 140kw - DFHA ARTEON SHOOTING ARTEON SHOOTING BRAKE (3H9) | 06.2020-12.2024 2.0 TDI - 1968ccm, 150pk, 110kw - DSRA, DSRB, DTSA, DTSB, DXPA CADDY V CADDY V Box Body/MPV (SBA, SBH) | 09.2020-11.2024 2.0 TDi - 1968ccm, 110pk, 81kw - CRVD CADDY V MPV (SBB, SBJ) | 09.2020-11.2024 2.0 TDi - 1968ccm, 110pk, 81kw - CRVD PASSAT B8 PASSAT B8 (3G2, CB2) | 08.2014-03.2024 1.8 TSI - 1798ccm, 180pk, 132kw - CJSA, CJSC PASSAT B8 (3G2, CB2) | 08.2014-03.2024 2.0 TDI - 1968ccm, 150pk, 110kw - CRLB, DBGA, DFGA, DSRA, DSRB, DTSA, DTSB PASSAT B8 (3G2, CB2) | 08.2014-03.2024 2.0 TDI - 1968ccm, 110pk, 81kw - CRLD, DFGB, DBGB PASSAT B8 (3G2, CB2) | 08.2014-03.2024 2.0 TDI - 1968ccm, 190pk, 140kw - DDAA, DFCA, DFHA PASSAT B8 Estate (3G5, CB5) | 08.2014-03.2024 1.8 TSI - 1798ccm, 180pk, 132kw - CJSA, CJSC PASSAT B8 Estate (3G5, CB5) | 08.2014-03.2024 2.0 TDI - 1968ccm, 150pk, 110kw - CRLB, DBGA, DFGA, DSRA, DSRB, DTSA, DTSB PASSAT B8 Estate (3G5, CB5) | 08.2014-03.2024 2.0 TDI - 1968ccm, 190pk, 140kw - DDAA, DFCA, DFHA PASSAT B8 Estate (3G5, CB5) | 08.2014-03.2024 2.0 TDI - 1968ccm, 110pk, 81kw - DFGB TIGUAN TIGUAN (AD1, AX1) | 01.2016-04.2024 1.6 TDI - 1598ccm, 115pk, 85kw - DGDB TIGUAN (AD1, AX1) | 01.2016-04.2024 2.0 TDI - 1968ccm, 110pk, 81kw - CYKC TIGUAN (AD1, AX1) | 01.2016-04.2024 2.0 TDI - 1968ccm, 150pk, 110kw - DFGA, DTSA, DTSB TIGUAN (AD1, AX1) | 01.2016-04.2024 2.0 TDI - 1968ccm, 115pk, 85kw - DFGC TIGUAN ALLSPACE TIGUAN ALLSPACE (BW2, BJ2) | 03.2017-07.2021 2.0 TDI - 1968ccm, 150pk, 110kw - DFGA, DTSA, DTSB TOURAN TOURAN (5T1) | 05.2015-07.2022 1.8 TSI - 1798ccm, 180pk, 132kw - CJSA TOURAN (5T1) | 05.2015-07.2022 2.0 TDI - 1968ccm, 110pk, 81kw - CRVA, CYKB, DFEB, DFGB TOURAN (5T1) | 05.2015-07.2022 2.0 TDI - 1968ccm, 150pk, 110kw - DFGA, DFEA, DTSB, DXPA TOURAN (5T1) | 05.2015-07.2022 2.0 TDI - 1968ccm, 116pk, 85kw - DFGC TOURAN Box TOURAN Box Body/MPV (5T1) | 05.2015-??? 2.0 TDI - 1968ccm, 150pk, 110kw - DFGA, DFEA, DTSB -
Original part numbers
3Q0407272C VW 3Q0407762LX VW 3Q0407762DX VW -
Manufacturer
Spidan is part of the large GKN Parts. Via Spidan, GKN offers a wide range of drive shafts, steering box covers and CV joints.GKN Automotive is a global leader in eDrive technologies, the architects of an electrified future. The innovation, expertise and global footprint enable GKN to power a sustainable future by delivering eDrive technologies. -
Delivery time
Expected delivery date:
29-06-2026
-
This item is subject to a deposit-return fee. After returning the old part, the deposit-return fee will be fully
refunded.
How does this work?
You return the old part – the part you have disassembled from your car - in the original packaging of the received new part. This ensures that the manufacturer has a clear and immediate understanding which product number it concerns. After the ability to recycle the part (see below for more information) has been checked and approved, the deposit-return fee will be refunded to the same bank account number. The bank account number from which the initial payment had been made.
Which issues do I need to consider?
The manufacturer will evaluate the part if it is applicable to recycling. Is the part broken or otherwise unrepairably damaged, by say a right angle grinder? The manufacturer will not be able to re-use the part and will reject reimbursement. In this case you can’t claim reclamation of the paid deposit-return fee. Naturally, Winparts will not reimburse the fee to you if the manufacturer rejects the old part. Processing time can take up to 2 weeks.
I return the used part, will I receive a new one?
Yes - the housing is often re-used, the part itself is completely new. You’ll have an improved original part with full warranty of the manufacturer. Of course you can count on it that the part meets all kind of rigorous quality checks.
Secure payment
You recently viewed
-
In stock