Engine stand for your car: Order with number plate

Engine stand broken symptoms

As just described, the engine stands absorb vibrations and jolts during starting and driving. The supports are therefore heavily loaded every ride, which can cause them to malfunction. Usually, faulty engine stands cause a number of symptoms. One of the most common symptoms is impact noises coming from the engine compartment. These noises are caused by the engine not being properly seated in the engine stands. Another symptom is that vibrations arise, because the engine stands will absorb the shock movements of the engine less well. Also, a moving engine in the engine compartment can indicate broken or failing engine stands. You will especially feel this motor movement when accelerating or braking. The motor will then jerk forwards, backwards, left or right. Properly working engine stands will normally stop this. If you recognize any of these symptoms or suspect that engine suspension problems have arisen, check your vehicle.

Replace engine stand

To be able to check whether the engine stands need to be replaced, you will have to put your car on a service pit or jack it up with a car jack. It is not possible to reach all engine stands from the hood. Of course you can also have the inspection carried out by a garage, but there is a good chance that the costs will quickly become high. Do the engine stands show serious mechanical damage or cracks in the rubber? Then it is important that you replace them as soon as possible.

Buy engine stands

Buying engine stands is quick and easy at Winparts. You can simply enter your number plate or car model on the site and the suitable car parts for your car will then be shown. Winparts is also the right place for other engine parts. For example, we sell oil pumps, crankshaft accessories, camshafts and inlet and exhaust valves.

Engine stand

The engine stands are the support that secures the engine block to the chassis. These are often made of metal supports with a strong rubber. An engine stand has the task of absorbing the vibrations and shock movements. These vibrations and shocks can come from the engine as well as from the outside. Every time you start the car or when you accelerate or brake, you will not notice the movements of the engine block. Due to the frequent use, the engine stands will wear and need to be replaced. At Winparts you can quickly order new supports with your number plate or car model.

10541 - 10560 / 12430 products

Filter

0 filters selected

Block view
List view

Shaft body/motor mount bearing

Fitting Position: Front right (driver's side)
Inner diameter 1 [mm]: 10
Inner diameter 2 [mm]: 12
Bearing Type: Rubber-metal Bearing
Width 1 [mm]: 50
Warranty: 2 years
Length [mm]: 164
Height [mm]: 101
Width [mm]: 78
Fastening hole spacing 1 [mm]: 28
Distance between mounting holes 2 [mm]: 135

£ 19.⁴²

Not available

Engine stand

Axle body/engine support bearing 37432 01 Lemforder

£ 65.26

Axle body/engine support bearing

£ 106.51

Shaft body/motor mount bearing

£ 32.93

Shaft body/motor mount bearing

£ 7.12

Shaft body/motor mount bearing

£ 44.66

Shaft body/motor mount bearing

£ 32.60

Shaft body/motor mount bearing

£ 42.30

Shaft body/motor mount bearing

£ 31.41

Shaft body/motor mount bearing

£ 15.82

Shaft body/motor mount bearing

£ 14.39

Shaft body/motor mount bearing

£ 30.98

Shaft body/motor mount bearing

£ 29.78

Shaft body/motor mount bearing

£ 17.14

Shaft body/motor mount bearing

£ 25.85

Shaft body/motor mount bearing

£ 43.83

Shaft body/motor mount bearing

£ 46.41

Shaft body/motor mount bearing

£ 42.65

Shaft body/motor mount bearing

£ 19.42

Shaft body/motor mount bearing

£ 45.47

Shaft body/motor mount bearing

£ 11.57

£ 65.²⁶

£ 106.⁵¹

£ 32.⁹³

£ 7.¹²

£ 44.⁶⁶

£ 32.⁶⁰

£ 42.³⁰

£ 31.⁴¹

£ 15.⁸²

£ 14.³⁹

£ 30.⁹⁸

£ 29.⁷⁸

£ 17.¹⁴

£ 25.⁸⁵

£ 43.⁸³

£ 46.⁴¹

£ 42.⁶⁵

£ 19.⁴²

£ 45.⁴⁷

£ 11.⁵⁷