Shaft Seal, camshaft 05628 FEBI
Outer diameter [mm]: 56
Fitting Position: Timing End
Inner diameter [mm]: 42
Warranty: 3 years
Thickness [mm]: 7
Fit guarantee, show parts suitable for your vehicle.
or .
Seal ring other
-
In stock
-
Shaft Seal, wheel Stabiliser 23662 FEBI
Material: FCR (fluorocarbon rubber)
Outer diameter [mm]: 73
Fitting Position: Rear Axle
Inner diameter [mm]: 60
Warranty: 3 years
Thickness [mm]: 11
In stock£ 6.35
-
Shaft Seal, wheel Stabiliser 23621 FEBI
Material: NBR (nitrile butadiene rubber)
Outer diameter [mm]: 75
Fitting Position: Front Axle
Inner diameter [mm]: 55
Warranty: 3 years
In stock£ 2.83
-
Shaft Seal, wheel hub 24994 FEBI
Material: NBR (nitrile butadiene rubber)
Outer diameter [mm]: 100
Fitting Position: Front Axle Left
Fitting Position: Front axle right (driver's side)
Inner diameter [mm]: 52
Supplementary Article/Info 2: With ABS sensor ring
Warranty: 3 years
In stock£ 3.65
-
Shaft Seal, wheel Stabiliser 03117 FEBI
Material: NBR (nitrile butadiene rubber)
Outer diameter [mm]: 52
Outer diameter [mm]: 62
Inner diameter [mm]: 40
Warranty: 3 years
Width [mm]: 8,5
In stock£ 0.68
-
Gasket Set, steering gear
Warranty: 3 years
Weight [kg]: 0,058
On order£ 30.19
-
Shaft Seal, intermediate shaft NF849 Payen
Material: MVQ (Silicone Elastomer)
Outer diameter [mm]: 40
Inner diameter [mm]: 30
Rotation Direction: Clockwise rotation
Warranty: 2 years
Radial Shaft Seal Design: 827S RD W
Height [mm]: 7
Not available£ 5.50
-
Shaft Seal, countershaft
Material: FPM (fluoride rubber)
Outer diameter [mm]: 40
Fitting Position: MOTOR
Inner diameter [mm]: 28
Inner diameter 1 [mm]: 28
Outer diameter 1 [mm]: 40
Warranty: 2 years
Swirl Type: Right turn-direction
Height [mm]: 7
Height 1 (mm): 7
Not available£ 5.36
-
Shaft Seal, countershaft
Material: ACM (Polyacrylate)
Outer diameter [mm]: 32
Inner diameter [mm]: 18
Inner diameter 1 [mm]: 18
Outer diameter 1 [mm]: 32
Warranty: 2 years
Swirl Type: Right turn-direction
Dust Cover: With dust lip
Height [mm]: 6
Height 1 (mm): 6
Not available£ 3.05
-
Shaft Seal, differential 31502 FEBI
Material: ACM (Polyacrylate)
Outer diameter [mm]: 68
Fitting Position: Transmission End
Fitting Position: Rear Axle Left
Inner diameter [mm]: 45
Paired article numbers: 31503
Warranty: 3 years
Thickness [mm]: 8
Weight [kg]: 0,02
Not available£ 4.85
-
Sealing ring, swivel bearing
Material: NBR (nitrile butadiene rubber)
Inner diameter 1 [mm]: 70
Outer diameter 1 [mm]: 107
Warranty: 2 years
Height 1 (mm): 11
Not available£ 16.50
-
seal
Material: ACM (Polyacrylate)
Outer diameter [mm]: 60
Fitting Position: Left and right, both sides
Inner diameter [mm]: 45
Warranty: 2 years
Thickness [mm]: 8
Not available£ 2.42
-
Sealing ring, shift rods 38162 FEBI
Outer diameter [mm]: 90
Inner diameter [mm]: 80
Warranty: 2 years
Thickness [mm]: 5
Not available£ 1.84