Timing belt tools

Every car has a timing belt or chain. Does your vehicle have a timing belt? Then it is very important to maintain it properly. Failure to properly lubricate or maintain the timing belt can eventually cause the belt to burst. This can result in major engine damage. Have you noticed damage to the timing belt? Then make sure to replace it as soon as possible.

If you are going to replace or maintain the timing belt yourself, you need the right tools. The exact tools you need depend on the car make and engine type. You probably don't have most of the tools you need at home. However, we advise you not to work with tools that are not suitable for this job. The timing belt can only be replaced correctly with the appropriate tools.

Which timing belt tools do I need?

The tools you need when replacing the timing belt often depend on the car make and type of engine block. It is most convenient to purchase a complete timing belt kit, but also to immediately connect a new water pump. The water pump generally wears in parallel with the belt. It would be a shame if you replaced the timing belt and then have to take it off again to replace the water pump.

To properly tension and time the timing belt, you will need, for example, a tension gauge, assembly tools and hose cutter.

Adjust timing belt

When replacing the timing belt, you will need to properly adjust and tension it. This is done on the basis of tension rollers and a tension meter. In the manual of the car you can find what the voltage value in Kg/Hz should be for your vehicle. With the tension gauge you can then easily measure whether the tension on the belt is adjusted correctly.

Buy timing belt tools

You can buy timing belt tools quickly and easily from Winparts. Navigate quickly to the right tools and we'll make sure you have it at home quickly. You can also contact us for other parts or belts. For example, also take a look at our auxiliary-belts, V-belts, crankshaft pulleys and auxiliary drive belt kits.

Fit guarantee, show parts suitable for your vehicle.

Enter your number plate or select your vehicle.

Timing belt tools

Are you going to replace the timing belt yourself? Then it is important to have the right tools in house. For example, you probably need a belt tensioner, assembly kit and belt tension gauge for the connection to the camshaft and crankshaft. At Winparts you will find everything you need for the correct installation of the timing belt. Quickly find out which tools you need. In our wide range you will find the tools of different quality brands such as Gates, Sonic and SKF.