Value pack Xenum DPF Cleaner 400ml 3x

Value pack Xenum DPF Cleaner 400ml 3x

Xenum DPF Cleaner is an aerosol specially developed to clean the particulate filter quickly and easily. This allows soot, ash and other contamination to be removed from the particulate filter without disassembly. Thanks to this cleaning, the capacity of the DPF is restored and the lifespan of the particulate filter is extended.

Properties

1. Cleaning without disassembly
2. Avoid loss of power
3. No more problems caused by driving short distances
4. Longer life of the particulate filter
5. Free from metal
6. Non-flammable
7. Removed ash

Application

The temperature of the particulate filter must be between 20°C and 40°C during use.

• Remove the temperature or pressure sensor from the exhaust just before the DPF.
• Insert the hose from the aerosol can into the opening with the spray direction towards the DPF.
• Spray the contents into the filter, moving the hose in circles while spraying. Let the product work for at least 30 minutes.
• Reinstall the temperature or pressure sensor.
• Start the engine, dirty water (contaminated with soot and ash) will drip out of the exhaust.
• Let the engine idle until the dripping stops.
• Start the regeneration by carrying out a test drive for approx. 20 - 30 minutes at a higher speed (100 km / h) and an engine speed of around 3000 rpm.

If necessary, read the car's computer and clear error messages.