Wynn's DPF & GPF On-Car Cleaner 500ml

Wynns DPF&GPF On-Car Cleaner

Wynn's DPF & GPF On-Car Cleaner, with its low foam content and non-combustible formulation, has been specially developed to enable workshops to safely and efficiently clean and restore particulate filters on diesel and petrol vehicles without affecting the vehicle's filter. to be removed.

1. Removes soot and ash deposits from blocked diesel & petrol particulate filters
2. Non-Combustible Formula
3. No need to remove the particulate filter from the vehicle

Application

• Feed the applicator tube (flexible applicator) directly into the particulate filter via the metal pressure sensor/differential pressure sensor, temperature sensor or lambda sensor. Make sure the selected sensor is lower than the turbo to prevent the product from running back into the engine
• Spray Wynn's DPF & GPD On-Car Cleaner into the particulate filter until the aerosol is completely empty.
• Let the product act for 15-30 minutes.
• Reconnect the line from the differential pressure sensor or temperature/lambda sensor.
• After settling in, restart the engine and let it idle for 5 minutes, then run the engine between 2,000-2,500 RPM for 5 minutes
• When airflow sensor has been disconnected, please reconnect it.
• Clear trouble codes and reset particulate filter data if required
• Take an extended test drive

Hazard Statements (CLP):
- H229 Pressurized container: May burst if heated
- H318 Causes serious eye damage