Steering wheel control interface
Retain the original steering wheel remote control functions,
if you trade in your factory radio for an aftermarket radio.
Compare the adapter's illustrated connector with
the one in your car to make sure you have the right one.
Also check if any of the
specified original factory radio is installed in your vehicle!
Remark:
CAN bus
Connection: ISO / Mini ISO
Connection: OEM steering wheel remote control > 3.5mm jack / loose cable
Vehicles with CAN bus power ISO connector
Vehicles with Blue&Me > Module must remain installed
Vehicles with/without OEM sound system
blue/white: +12V amplifier remote control*
DIP switch settings for the aftermarket device manufacturer (see BDA)
Suitable for the following vehicles:
Alfa Romeo
Alfa Romeo 159 (939) 09/2005 - 11/2011
Alfa Romeo Brera (939) 01/2006 - 10/2010
Alfa Romeo Spider (939) 01/2007 - 10/2010
Fiat
Fiat Stilo (ZAF 192) 02/2003 - 01/2008**
Lancia
Lancia Musa (ZAL 350) 11/2004 - 12/2010
Lancia Ypsilon (UAL 843) 10/2006 - 08/2010
The following signals are available:
Vehicles that are re-imported or vehicles with different software may be functionally incompatible.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
pink: speed signal
green: ground GND handbrake signal
Output load capacity: 250 mA max.
Current requirement greater than 250 mA:
1 relay Coil resistance 75 Ohm min.
2 relays Coil resistance 150 Ohm min.
Steering wheel remote control
*Adapter active system Alfa Romeo/Lancia ISO>ISO > Article: 13-1001-50
*Adapter active system various vehicles ISO>ISO > Article: 13-1190-50
**Vehicles without OEM device from Visteon
Suitable for: Universal
Lancia Delta 2008-2014
Alfa Romeo 159 2005-2012
Alfa Romeo Brera 2006-2011
Alfa Romeo Spider 2006-2011
Fiat Stilo 2001-2008
Lancia Musa 2004-2010
Lancia Ypsilon 2006-2010