Steering wheel control interface
Retain the original steering wheel remote control functions,
if you trade in your factory radio for an aftermarket radio.
Compare the adapter's illustrated connector with
the one in your car to make sure you have the right one.
Also check if any of the
specified original factory radio is installed in your vehicle!
Remark:
CAN bus
Connection: 40-pin Quadlock Renault connector
Connection: OEM steering wheel remote control > 3.5mm plug / loose cable
Opel vehicles with CD30/CD30MP3/CDC40/CD50/CD70 OEM device
Renault vehicles without OEM sound system Arkamys DSP
Renault vehicles without Radiosat Classic OEM device*
Vehicles with TomTom OEM navigation functionality not supported
LFB function only possible when engine is running
Date/time setting not supported
DIP switch settings for the aftermarket device manufacturer (see BDA)
Suitable for the following vehicles:
Opel
Opel Vivaro (X83) 01/2011 - 05/2014
Renault
Renault Clio III (R) 05/2009 - 07/2014
Renault Mégane III (B/BZ) 11/2009 - 02/2012
Renault Scenic III (JZ) 06/2009 - 02/2012
Renault Twingo II (N) 09/2009 - 12/2011**
Renault Wind (N) 08/2010 - 08/2013**
The following signals are given:
Vehicles that are re-imported or vehicles with different software may be functionally incompatible.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
pink: speed signal
green: ground GND handbrake signal
Output load capacity: 250 mA max.
Current requirement greater than 250 mA:
1 relay Coil resistance 75 Ohm min.
2 relays Coil resistance 150 Ohm min.
Steering wheel remote control
*Contact Support
**Vehicles with tuner list OEM device without display
Suitable for: Opel Vivaro 2011-2014
Renault Clio 2009-2014
Renault Megane 2008-2012
Renault Scenic 2009-2012
Renault Twingo 2009-2011
Renault Wind 2010-2013