Retain the original steering wheel controls when replacing the factory radio with an aftermarket radio.
Depending on the vehicle's equipment and the functionality and software of the with an aftermarket device, certain control functions may be lost or be replace by other functions.
Compare the adapter plugs shown with those in your vehicle and check if they fit visually and technically.
Also check whether one of the listed original factory radios was installed in your vehicle.
Before final assembly, check whether the vehicle functions, vehicle settings and Steering wheel controls work properly.
Remark:
CAN bus Connection: ISO / Mini ISO Connection: OEM steering wheel control > 3.5 mm jack / separate cable Vehicles with 2 x 4 functions Fiat Ducato steering wheel / front control buttons
Vehicles with radio preparation
Vehicles with 1-DIN Bosch MY2014 LDWS OEM device: +12V continuous current terminal 30 / +12V ignition current terminal 15 swap if necessary
Vehicles without a 2-DIN Delphi OEM device
Vehicles without Magneti Marelli OEM navigation
Dipp switch settings for the manufacturer of the retrofitted device (see BDA)
Suitable for the following vehicles:
Iveco Daily VI 07/2014 – 2019
The following signals are made available:
Re-imported vehicles or vehicles with non-standard software may be incompatible in terms of functions.
red: +12V ignition terminal 15 orange: +12V lighting terminal 58 purple/white: +12V reverse signal pink: speed signal green: ground GND handbrake signal Output load capacity: 250 mA max.
Current consumption greater than 250 mA: 1 relay coil resistance 75 Ohm min. 2 relays coil resistance 150 Ohm min. Suitable for: Universal Iveco Daily 2014-2019
Warranty
2 years
for brand
ISO
Applicability
IVECO
DAILY V
DAILY V Bus | 09.2011-02.2014 50C15 - 2998ccm, 146pk, 107kw - F1CE3481B